Tonar

About
News
Production
Sales office
Contacts

Rambler's Top100 ßíäåêñ öèòèðîâàíèÿ


Tonar
site map | ðóññêàÿ âåðñèÿ  

News

The factory repairs chassis of the semitrailers of different models produced by any manufacturers

14.02.2005 

The factory repairs both Russian-made and foreign chassis of the semitrailers of different models. It provides the following service:

1. replaces old axles by those produced by «Tonar»

2. installs pneumatic suspensions instead of spring ones

3. makes repairing operations of brake pneumatic system as well as suspension one.

 
 

Guarantee period is increased up to 2 years

29.01.2005 

Starting with the 1-st of February «Tonar» increases guarantee period of all the semitrailers up to 2 years. It proves the reliability of the produced machinery.

 
 

The first lot of the 20`-semitrailers container carriers

24.01.2005 

The factory manufactured the first lot of semitrailers container carriers for transportation of 20`-containers and tank-containers.

 
 

Semitrailer container carrier

17.12.2004 

The designers of the factory have already started the engineering development of the tank-container as well as the semitrailer container carrier for transportation of 20` container.

 
 

Semitrailer roll carrier

01.12.2004 

The semitrailer for roll shrrt steel transportation is already under careful development of the factory designers. Transported rolls diameter - 900...1250 mm.

 
 

New industrial areas are put into service

17.11.2004 

The building of more than 6500 m2 of industrial areas has been accomplished in September 2004. 800 m2 of areas holding the plasma cutting device which enables to make cutting operation of metall 12000 mm long and with the thickness of 3 to 50 mm have been put into operation. they also contain the area for welding of frame mainbeams of the semitrailers. to achieve this purpose a universal welding jid was specially designed and put into service. it enables to increase the production of the frames of the semitrailers.

In the nearest future these areas will be fully equipped with the welding jids to make welding operations with the frames of the semitrailers.

These important industrial areas will also contain jet processing of frames and workpieces, the line for dying of frames and bodies, as well as the assembly belt line to make assembling operations with the semitrailers. the contracts for designing and manufacturing of these lines have already been concluded.

The factory is also planning to build its own service center wich will enable to make the service operation more productive.

 
 

It`s a triumph!

05.08.2004 

This is the only suitable word to appraise the tilt covered semitrailer «Tonar-97461» wich successfully covered the distance from Lissabon to Vladivostok without any failures. Skillful drivers Alexandr Kolerov and Igor Nushtaev drove the train through transcontinental autorun.

Participation in this autorun turned to be the real examination for factory-made vehicles. It is worth emphasizing the fact that an ordinary serial tilt covered train was sent to prove the high quality and reliability of the machinary manufactured by «Tonar». No further development was speacially done. The managers of the factory were more interested in acknowledging weak points of their products than intently hiding them from the purchasers. It`s serial number is 158. The experience of a long-distance run makes «Tonar-97461» to outline against other semitrailers.

Neither the in-factory made axles, brake drums and shoes, nor the frame and the semitrailer`s framework failed through the distance. It`s still more important to add to indisputable advantages of the semitrailer hardly passible areas of Chita-Vladivostok track. It`s no accident that local long-distance drivers were fully assured in the fact that truck tractors would not be able to stay without any loss. But notwithstanding our vehicle managed to pass there and back. «Tonar»`s semitrailer showed off exclusively high endurance, reliability and skillful technical solutions of the construction. It gives the staff of the factory, manufactyring these machines, a rightful privilege to be proud of their products.

Nowadays tonar`s insulated semitrailers pass through the roads of Sibiria. In the nearest future a great amount of tonar`s machinery will solve transportation problems in Far East.

The autorun participants were awarded the bronze statuette in the shape of three horses, symbolizing the power of «Mersedes», «KamAZ» and «Tonar».

 
 

New axles are coming

11.06.2004 

The work at the technical documents for the mastering of 17-inch axles production is coming to an end. It will venture the factory to assemble trailers and semitrailers with the increased load capacity in the comparison with the present-day.

 
 

Meat carcasses carrier on the «KIA» chassis

30.04.2004 

Moscow firm dealing with meat deliveries ordered the refrigerator on «KIA» chassis for transportation of meat carcasses in the suspended condition.

 
 

The guality will be increased

12.03.2004 

Our processing center is equipped with the fourth coordinate position. It gives the possibility to assemble workpieces of the spinning mechanism automaticly. New equipment is used to drill holes in bars and butt plates and shave torque links of brake drums. The use of this novelty will highly increase the quality and reliability of the factory-made axles, thus liberating one workman.

 
 

The choice is here

10.03.2004 

«Tonar» actively realizes american saddle truck tractors International to our carries. Their high reliability, considerable resource and reasonable price proved these tractors to be much in demand with the russian purchasers. Their rate of sales is constantly increasing. In the nearest future our factory is going to offer businessmen bonnet truck tractors Freightliner. They are designed for even harder operation conditions due to its convenience and high service life. This bonnet truck has powerful suspension and soft drive.

 
 
Back 1 2 3 4 5




       About : News : Production : Where to buy : Contacts