· Height of the tractor`s saddle-coupler must be 1150-1250 mm.
· Mass of transportable load -27900
· Kerb weight (with the spare wheel) does not exceed 6600kg.
· Fully loaded mass of the semitrailer does not exceed 34500 kg
· Overall size radius of the forward section of the semitrailer in the standard position must not exceed 2040 mm.
· The maximum speed of the semitrailer, km/h -100
· Suspension – rigid-axle type suspension. It holds on the longitudinal elastic levers with the pneumatic elastic elements and the telescopic hydraulic shock-absobers.
· Crane of manual suspencion control enters into the assembly. The installation of the front axle lift is possible in accordance with the customer`s desire.
· Wheel axles – model 1042 produced by «TONAR»
· Wheels – disk-shaped 11,75 X of 22,5
· Tires - tubeless 385/65R 22,5
· Working brake system includes the two-wire pneumatic drive and the automatic regulator of brake forces. Drum brake mechanisms are equipped with the internal shoes. ABS «WABCO». The installation of EBS is possible to order.
· Parking brake system - powered drive from the spring energy-storage battery on the medium axle.
· Emergency brake system –in case of the break of connecting mains with the tractor - the working brake inner tubes of all axles; in case of air leakage - spring energy-storage batteries of the medium axle.
· Electrical equipment - executed according to a single-wire diagram with a nominal stress of 24 v (12V to order)
· Support legs - mechanical with the two-step, two-speed gear set, maximum range of the support leg - 450 mm;
· Frame – welded out of the double-T section mainbeams, varying in height, and joint by cross-beams. Pintle can be transposed forward to 350 mm.
· The semitrailer has proper certifications and fully satisfies the technical requirements of the accident-free truck of the category «special green», «EURO- 3».
Top