+7 (4964) 16-32-49 Head Office


Moving floor semitrailer
Body volume 82,6/76,8 m³


Specifications and prices

Cargo weight, kg 27 200
Kerb vehicle weight (with a spare wheel), not more, kg 9 940
Fifth wheel height, mm 1200/1350
Load on the fifth wheel, kg 10 500/ 11 000
Body volume, m³ 76,8/77,8/82,6
Suspension dependent on the longitudinal elastic arms with pn
Wheel axles Tonar
Lifting axle front
Tyres tubeless 385/65R 22,5
Landing gear 24 t
No risk of semitrailer roll-over during unloading, as compared with tipping semitrailers.В 
Handling is done horizontally.В 
Relative roughness of the road is not critical as well as unstable soils of the loading area;В 
Unloading can be done in rooms with a ceiling slightly higher than the actual semi-trailer (low warehouses, factory shops , docks );В 
Full control of the hydraulic equipment with the help of a remote hand control;В 
The design of the moving floor does not require any of scheduled technical support during the operation;В 
It`s possible to make handling without the use of the loader inside the body.В 

Moving floor is a series of longitudinal aluminum beams that are hydraulically driven (three section drive). Each beam section is actuated by its cylinder. Beams jig in the longitudinal direction. When handling all beam sections move simultaneously (pace of the beams - 200 mm). During the return section beams move alternately. Then operation cycles are repeated and the load moves. Complete unloading time is 15 min.В 

Базовая комплектация:

Fifth wheel height,
Moving floor semitrailer, 3 axles1200/1350

Дополнительные опции:

Element has not been found.

Element has not been found.

Наименование Фото Цена

Hub assembly

Wheel bearings are lubricated by the "blue" grease MS1510Blue. This lubricant is compatible with lithium grease and high temperature grease and is designed for heavy-loaded units, and also contains antioxidant additives to provide long-term operation at high pressure and temperature.
Castellated nut with a splinting to adjust hub bearing provides reliability of the hub assembly.

Air suspension control valve

Air suspension control valve:
allows to bleed and pump the air suspension before and after unloading

Release valve

Release valve controls the parking brake

Landing gear

2 power-driven jacks, accessible load 2x12 tons, square shape with the base plate, manufactured by JOST (Germany). One side control (right).


Electrical equipment uses a harness of traffic signal with a connection socket.
Two-wire scheme.

Rear bumper

Updated design: rear bumper is now higher; its design is slightly changed.

Metal tool box

Pull up/down the axles

Axle lifting (lowering) mechanism is driven by a command from the T-EBS block when unloading (loading) the semitrailer

Basket for spare wheels

The size of the basket depends on the model of the semitrailer

A similar kind of semitrailers

Moving floor semitrailer
Body volume 54,5 m³